Falcon Wagon Upper Tailgate Bailey Channel Rubber | XK- XP Ford

$45.05

Falcon Wagon Upper Tailgate Bailey Channel for XK – XP Falcon

 

BAILEY CHANNEL FITTING INSTRUCTIONS

Falcon Wagon Upper Tailgate Bailey Channel Rubber for XK – XP Ford Falcon

 

  1. To fit this bailey channel into the upper opening, first make sure that all of the original bailey channel has been removed and cleaned completely.
  2. Remove the old bailey channel in the corners by using a sharp knife and carefully cut through the top of the channel into the sides (not more than half way down) approximately 10 mm spacing’s.Place the new bailey channel along the opening to estimate where the curves start before cutting.
  3. Super Glue where needed to make sure the channel stays put, don’t be in a hurry to install the channel.
  4. If the ends on the original channeling are intact, these can be cut off and glued to the ends of the new channeling to seal the tailgate completely when the glass is up.

Falcon Wagon Video Links:

How To Series: Bending bailey channels with stainless steel edge.

Here’s Why Every Teenager Should Have a Car Like This – 1965 Ford Falcon Wagon

 

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    Falcon Wagon Upper Tailgate Bailey ChannelFalcon Wagon Upper Tailgate Bailey Channel Rubber | XK- XP Ford
    $45.05
    Scroll to Top