CAR DOOR SEAL REPAIR AND REPLACE INSTRUCTIONS
CAR DOOR SEAL REPAIR and REPLACE INSTRUCTIONS FOR Holden EJ-EH-HD-HR-HK-HT-HG-HQ-HJ-HX-HZ-WB & LH-LX-UC TORANA
Before fitting this seal please carefully read these instructions as follows:
1. Check Your car door seal to find where it is joined. In most cases, the clips at this point are closer together than the
rest. This is your starting point.
2. In most cases, your boot lid will also have two holes closer together than the rest.
3. Ensure you are fitting the Door Belt Weatherstrip seal the correct way as shown on the illustration above.
If you follow these three steps you should not have any problem fitting your seal!
DIY car seal repair how to video link: How To Replace Your Window Trim Seal